description

The composition of the strip brush

The extended product of the strip brush is that the brush strip is spirally wound on the processed steel shaft, and the two ends are welded and fixed. It is characterized by high density of bristles and does not fall off. The hollow spring brush can be made into a hollow spring brush according to the size, which can be installed and replaced by the customer, and the use cost is lower. The brush shaft can be made of 45# round steel, ordinary stainless steel and 304# stainless steel. According to different purposes, the brush can be made of sisal, wool, PP wire, steel wire, stainless steel wire, copper-plated wire, copper wire, abrasive wire and other materials.

Shaped Strip Brush

Stainless steel base

Galvanized iron base

Aluminum base

Application

Strip brushes are widely used in all kinds of automatic doors, movable doors and windows, revolving doors, sliding doors, elevator seals and to block dust, prevent dust from entering the interior, and large industrial machinery cleaning, glass edger water blocking, agricultural harvester interior Sealing, sealing of wind turbine cabin cover, car washer strip brush, etc.

Cleaning of the strip brush

Need to pay attention to the following 4 questions:

1. Never wash against the bristles of the strip brush.

2. After cleaning the strip brush, use facial tissue or cotton pad to gently press with your fingers to let the water drain out, but remember not to twist the bristles, otherwise it will damage the bristles of the strip brush and loosen the structure of the bristles, leading to hair loss.

3. After the strip brush is cleaned, the bristles can be hung up and let the bristles face down to dry.

4. It must be air-dried naturally, not with a hair dryer, and not to be dried in the sun, otherwise it may damage the material of the brush bristles.